Kontron MOPSlcdGX1, Руководство по эксплуатации продукта

Страница: 28 / 71

MOPSlcdGX1 Product Manual Floppy-Drive Interface
Kontron Embedded Modules Revision 1.3 22
12. FLOPPY-DRIVE INTERFACE
The floppy-drive interface can support one 3.5” drive, using the adapter cable ADA-
Floppy 2, (Kontron Embedded Modules part number 96001-0000-00-0).
The board can support the following drive capacities:
•
720K
•
1.44M
•
2.88M
For more information on floppy-drive interfaces, please see the Appendix G: Literature
and Standards chapter.
12.1 Connector (X13)
To find the location of Connector X13 on the MOPSlcdGX1 board, please see the
Appendix E: Connector Layout chapter.
Signal Function Pin Signal Function
VCC (*) + 5V 2 IDX Index
VCC (*) + 5V 4 DS0 Drive select 0
VCC (*) + 5V 6 DCHNG# Disk change
NC - 8 NC -
NC - 10 Mo0 Motor on
NC - 12 DIR Direction select
NC - 14 STEP Step
GND Ground 16 WD Write data
GND Ground 18 WG Write gate
GND Ground 20 TR00 Track 00
GND Ground 22 WP Write protect
GND Ground 24 RD Read data
GND Ground 26 SIDE Side one select
Note
: (*)To protect the external power lines of peripheral devices, make sure that:
- wires have the right diameter to withstand the maximum available current
- the enclosure of the peripheral device fulfils the fire protecting requirements of
IEC/EN 60950.
StockCheck.com