Kontron mITX-BDW-U Скачать руководство пользователя

Страница: 29 / 105

mITX-BDW-U – User Guide, Rev. 1.6

www.kontron.com

// 29

6.3.

USB Connectors (J6, J7)

The mITX-BDW-U board contains a EHCI (Enhanced Host Controller Interface) and

XHCI (Extensible Host Controller

Interface). The

EHCI controller

supports six USB 2.0 ports allowing data transfers up to 480 Mb/s.

The XHCI controller

supports up to four USB 3.0 ports allowing data transfers up to 5 Gb/s.

Four of the USB 3.0 ports are shared with four

of the USB 2.0 ports (USB0 – USB3).

Not all USB 2.0 and USB 3.0 ports are physically connected to the board.

Legacy Keyboard/Mouse and wakeup from sleep states are supported. Over-current detection on all USB ports is
supported. The following USB connectors are available:



USB 2.0/3.0 Port 0, 1, 2 & 3 are supplied on the dual USB connectors in the I/O Area (J6 & J7) and supports
USB3.0/USB2.0.



USB 2.0 Port 4, 5 are supplied on the combined Front Panel connector (J23).



USB 2.0 Port 7 is available in the mPCIe connector (J27).

For USB2.0 cabling it is required to use only HiSpeed USB cable, specified in USB2.0 standard:

For USB3.0 cabling it is required to use only HiSpeed USB cable, specified in USB3.0 standard:

Содержание mITX-BDW-U










































































































Результаты поиска

Содержание mITX-BDW-U

Отзывы:

Похожие инструкции для mITX-BDW-U

Бренды по названию

Популярные бренды

Kontron mITX-BDW-U, Руководство пользователя

Результаты поиска

Содержание mITX-BDW-U

Отзывы:

Похожие инструкции для mITX-BDW-U

Бренды по названию

Популярные бренды