mITX-APL
Doc. Rev. 1.2
www.kontron.com
// 17
4/
System specifications
4.1.
Component Main Data
The table below summarizes the features of the mITX-APL embedded motherboard.
Table 3: Component Main Data
Motherboard mITX-APL
Form factor
Mini ITX (170.18 mm by 170.18 mm by 1.6 mm/LengthxWidthxThickness)
Processor
Onboard CPU variants
Intel® Apollo Lake Processor line, 14 nm SoC
Intel® Atom™ x7 E3950 4C 2.0 GHz, 12 W
Intel® Atom™ x5 E3940 4C 1.8 GHz, 9.5 W
Intel® Atom™ x5 E3930 2C 1.8 GHz, 6.5 W
Intel® Mobile Celeron® N3350 2C 2.3 GHz, 6 W
BIOS
Winbond W25Q128FVSIG or Micron N25Q128A13ESE40F (128Mb) for System BIOS
Platform
Controller Hub
(PCH)
BGA-1296
Memory
A DDR3L 204-pin SODIMM memory module can be used, like
DDR3L, 4 GB 1867
MHz, PC3-1867, non-ECC SODIMM
DDR3L, 8 GB 1867
MHz, PC3-1867, non-ECC SODIMM
DDR3L, 4 GB 1867MHz, PC3-1867, non-ECC, E2 SODIMM
DDR3L, 8 GB 1867MHz, PC3-1867, non-ECC, E2 SODIMM
Flash Memory
The mITX-APL supports embedded embedded Multimedia Card (eMMC) interface 5.0 with a
maximum bus speed of 400 MB/s. The board will also support a SD card interface UHS-I
standard with a maximum bus speed of 104 MB/s. The eMMC chip is soldered on board. The
microSD card interface is sharing a combo connector with the micro SIM card.
Storage
two SATA 3.0: While the first vertical SATA port is dedicated port from the SoC, the second
right angle port is combined with mSATA.
Watchdog Timer
Watchdog timer will be supported by the MAX10 CPLD
Wake On
Wake on LAN, USB, Power button (S3 to S5)
Hardware Status
Monitor
Monitoring CPU and system temperature, voltage status and fan speed
TPM
Infineon SLB9665 (option)
Power
management
ACPI System States support (S0, S3, S4 and S5)
Processor Core/Package States support (C0, C1, C1E, C6, C7, C7L, C8, C9, C10)
Processor Display States support (D0 to D5, and D9)
Dynamic I/O power reduction (disabling sense amps on input buffers, tri-stating
output buffers)
Active power-down of display links
Battery
BR2032/CR2032
See Safety Instructions below this table!
