Kontron Microspace Series, Руководство пользователя

Страница: 34 / 63

www.kontron.com
32
MPC20/20L/21/21C MPC20WOL/21WOL / Prepare the Computer System
7 Prepare the Computer System
Warning: ESD Sensitive Device! Place the embedded computer board on an isolated, ESD-protected surface.
Ensure that all equipment, tools and people are fully protected against ESD.
7.1 Print Manuals from the Product CD
»
Place the Product-CD into a personal computer that is connected to a printer.
»
Open the CD; open the directory MPC20/21.
Note: Since the internal computer board is the MSB800 embedded computer, the corresponding manuals must be
used for detailed information.
Print out the following detailed manuals:
1. The Technical/Hardware manual: MSB800_Detailed.pdf
2. The BIOS/Driver/Software manual: GEODE_LX800.pdf
7.2 Jumper Configuration
To open the device, refer to Section 6.1.
Jumper Structure Open Closed Remarks
J1 CompactFlash master / slave Slave Master
J2 Auto-start function Disabled Enabled Disabled corresponds to manual start
J1 J2