Kontron Microspace Series, Руководство пользователя

Страница: 30 / 63

www.kontron.com
28
MPC20/20L/21/21C MPC20WOL/21WOL / Functions
5.1.6 Power Supply Connector
BLZ 5.08/3F SN SW (Part number: 1803050000) available from www.weidmueller.com .
Signal Definitions
+ Power 10-32V power supply
GND
0V or the ground from the power supply
Shield Grounding of the MPC20/21
Pin Left Middle Right
Signal GND Chassis ground Power 10-30V
5.2 DC-Power Input Specifications
5.2.1 Nominal DC-Power Input Voltage
The nominal DC-power input is within the 10Volt to 32Volt range. This means the device may be used with 12V or 24V
batteries, usually found in boats, cars and trucks.
5.2.2 Minimal DC-Power Input Voltage Specification
The MPC runs with a minimal power of 7.2V, measured at the input of the rear connector. If installed in a vehicle that
is starting its motor, the power supply voltage may drop under 8V for a moment.
The following limits are specified:
DC-Input Voltage Duration Comments
32V Highest static input voltage
12/24V Always: nominal operation
8V Lowest static voltage
5.2.3 IT-Power System
The product is suitable for use in IT-power systems.