Kontron KISS4U, Руководство пользователя, Страница: 52 / 60

page 52 KISS4U User’s Guide
Replacing the Lithium Battery
The integrated motherboard or SBC-board of your system is equipped with a lithium
battery. To replace the battery, please proceed as follows:
1. Open the unit as described in the “Installing/Removing the Expansion Cards”
chapter (steps 1-4).
2. If your system has expansion cards, first remove the cards and their
corresponding data cables in order to have access to the lithium battery.
3. Remove the old battery by pressing outwards on the ejector spring.
4. Place the new battery into the socket.
5. Make sure that you insert the battery the right way around. The plus pole must be
on the top!
6. The lithium battery must be replaced with an identical battery or a battery type
recommended by Kontron Embedded Computers.
7. Reinstall the expansion cards which you removed and reconnect their data
cables.
8. Close the Unit as described in the section “Installing/Removing the Expansion
Cards” (steps 5-8).
Do not dispose of lithium batteries in the general trash collection.
Dispose of the battery in accordance with local regulations dealing
with the disposal of special materials, (e.g. at the designated
collecting points for disposal of batteries).