8. Assembly, Disassembly
KISS 4U V2 – User's Guide (Version 1.01)
To install or remove an expansion card, perform the following steps:
1.
Turn your system off and disconnect it from the AC power supply.
In order to remove the cover, following knurled screws have to be loosen:
the cover fastening screw (Fig. 12 and Fig. 13, pos. 14 and Fig. 28) on the front side
the knurled screws (Fig. 16 and Fig. 17, pos. 8 and Fig. 29)on the rear side.
2.
Loosen the knurled screws (the cover fastening screw on the front side and the two knurled screws on the rear side)
which secure the cover (see Fig. 28 and Fig. 29).
Fig. 28: Loosening the knurled cover fastening screw on the front side
Fig. 29: Loosening the knurled screw on the rear side
www.kontron.com
29
