7. Product Description
KISS 4U V2 – User's Guide (Version 1.01)
7.1.6.
Filter Mat and Filter Mat Holder
The filter mat and the filter mat holder (Fig. 12 and Fig. 13, pos. 16) are located behind the air grilles of the front access
panel (Fig. 10, pos. 3). The filter mat holder is fastened to the fan slide-in module (Fig. 12 and Fig. 13, pos. 13) via two
knurled screws and two positioning plates. A filter mat is inserted in the filter mat holder. This filter mat protects your
system against dust and dirt (see chapter 10.1 “Cleaning the Filter Mat”).
7.1.7.
Steel Mesh Guard (for IP52 Variant only)
The KISS 4U V2 platform variant with IP52 protection class provides (for indoor use) protection against dust and
moisture. Please observe the details in the subsection 10.1.1 “Cleaning Steel Mesh Guard (for IP52 Protection Class only).
The frontal IP52 protection class is ensured for the KISS 4U V2 platform only with an additional inserted
steel mesh guard, and with closed front access panel.
7.1.8.
Drive Bays
Depending on the ordered system configuration, the system can be equipped with up to five drives on the front side (see
Fig. 12 and Fig. 13, pos. 6, 7, 8, 9, 11):
Drive Bay
Description
L1
Externally accessible 5.25" drive bay (shown with a DVD drive installed)
L2
Externally accessible 5.25" drive bay (shown with covering plate)
L3
Externally accessible 5.25" drive bay (shown with covering plate)
L4
One internal 3.5" drive bay for a SATA HDD or for a front accessible slim-line drive bay (shown
with an internal, not externally accessible HDD installed)
L5
Externally accessible 3.5" drive bay (shown with covering plate)
For KISS 4U V2 system configurations with a disk subsystem with five HDDs, the drive bays L1, L2 and
L3 are occupied by this subsystem with removable HDDs.
For customer-specific versions and system configurations, please refer to the corresponding
“KISS 4U V2 Systems - Configuration Guides” for KISS 4U V2 on our website
.
20
www.kontron.com
