Kontron KBox F-420-WLU, Руководство пользователя

Страница: 65 / 81

KBox F-420-WLU - User Guide, Rev. 1.0
www.kontron.com // 65
Figure 29: BIOS Advanced Menu --- Super IO Configuration --- Serial Port 1 Configuration
BIOS SETUP UTILITY
Main Advanced Power Boot Security Save & Exit
Super Port 1 Configuration
Serial Port [Enabled]
→ ←
: Select Screen
Device Settings IO=3F8h; IRQ=4;
↑ ↓
: Select Item
Enter: Select
Change Settings [Auto] +/-: Change Opt.
Serial Port 1 Type [RS232] F1: General Help
RS485 Deplux Mode* [Half Duplex] F2: Previous Values
RS485 Auto Flow Control** [Disabled] F3: Optimized Defaults
RS485/422 Receiver Termination*** [Enabled] F4: Save & Exit
ESC: Exit
Version 2.20.1275. Copyright (C) 2020, American Megatrends, Inc.
* This item appears only when selecting RS485 for the Serial Port 1 Type.
** This item appears only when selection RS458 for Serial Port 1 Type & selecting Half Duplex for RS485 Duplex Mode.
*** This item appears only when selecting RS422 or RS485 for Seral Port 1 Type.
Feature Option Description
Serial Port [Disabled], [Enabled] Enable or disable Serial Port (COM).
Change Settings [Auto], [IO=3F8h;
IRQ=4;], [IO=3F8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=2F8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=3E8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;], [IO=2E8h;
IRQ=3, 4, 5, 6, 7, 9, 10,
11, 12;] Select an optimal setting for Super IO device.
Serial Port 1 Type [RS232], [RS422],
[RS485] Serial Port 1 Type.
RS485 Duplex Mode [Half Duplex], [Full
Duplex] RS485 Duplex Mode.
RS485 Auto Flow
Control [Disabled], [Enabled] Enable or disable RS485 Auto Flow Control.
RS485/422 Receiver
Termination [Disabled], [Enabled] Enable or disable RS485/422 Receiver Termination.