KBox F-420-WLU - User Guide, Rev. 1.0
// 41
To mount the KBox F-420-WLU please proceed according to the steps described:
1.
Prepare the mounting surface with four screws (Figure 16, pos. 2) and if necessary anchors corresponding to the
mounting surface type if no VESA-compliant screw holes are available.
2.
Secure the VESA mounting bracket (Figure 16, pos. 1) to the mounting surface with screws (Figure 18).
Figure 18: Securing the VESA mounting bracket
3.
Secure two hanger screws (Figure 16, pos. 3) to the bottom side of the KBox F-420-WLU (Figure 19).
Figure 19: Securing the hanger screws
4.
Insert the heads of the two hanger screws secured on the chassis of the KBox F-420-WLU into the holes on the
VESA mounting bracket. Slide the chassis down to secure (Figure 20).
Figure 20: Securing the KBox F-420-WLU onto the mounting bracket
Содержание KBox F-420-WLU
Страница 1: ... USER GUIDE www kontron com KBox F 420 WLU Doc User Guide Rev 1 0 Doc ID To be Determined ...
Страница 2: ...KBox F 420 WLU User Guide Rev 1 0 www kontron com 2 This page has been intentionally left blank ...
Страница 44: ...KBox F 420 WLU User Guide Rev 1 0 www kontron com 44 ...
Страница 51: ...KBox F 420 WLU User Guide Rev 1 0 www kontron com 51 Figure 23 Mechanical Drawing model with DC jack unit mm ...
