Kontron ETX-LX2, Руководство пользователя

Страница: 50 / 73

11 Appendix C: BIOS Operation
Kontron User's Guide ETX®-LX2 49
Type the new password, up to eight characters in length, and press <Enter>. The new password will clear
any previously entered password from CMOS memory. You will be asked to confirm the password. Type
the password again and press <Enter>. You may also press <Esc> to abort the change.
To disable a password, just press <Enter> when you are prompted to enter the password. A message will
confirm that password protection will be disabled. Once the password is disabled, the system will boot
and you can enter Setup freely.
PASSWORD DISABLED.
When a password has been enabled, you will be prompted to enter it every time you try to enter Setup.
This prevents an unauthorized person from changing any part of your system configuration.
Additionally, when you have enabled a password, you can also require the BIOS to request the password
every time your system is rebooted. This would prevent unauthorized use of your computer.
You can determine when the password is requested in the BIOS Features Setup Menu and its Security
option (see above). If the Security option is set to "System", a password will be required both at boot
and on entry into Setup. If set to "Setup", a password is required only when trying to enter Setup.
11.15 Exit Selection
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing "Y" stores the selections you made in CMOS - a special section of memory that stays on after
you turn your system off. The next time you boot your computer, the BIOS configures your system
according to the Setup selections stored in CMOS. After saving the values, the system is restarted.
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing any changes in CMOS. The previous selections remain in
effect. This exits the Setup utility and restarts your computer.