TVtoLCD User´s Guide
On Screen Display
15
4.19
ADC Input Connector CN1000 (Light Sensor Input)
Connector: Molex 53261-0590
Matching Connector: Molex 51021-0500
Pin
Name
Description
O
1
GND
Power Ground
O
2
ADC1
ADC1 Input *Note1
O
3
DVDD3.3 3.3 Volt output source (max.50mA)
O
4
ADC2
ADC2 Input *Note1
O
5
GND
Power Ground
*Note1: Input range is 0 - 3V. Onboard pulled up to DVDD3.3 through 4, 7 K
Ω
resistor.
5.
On Screen Display
With the OSD ( On Screen Display ) you can modify the settings and control the special features of the
CRT
to
LCD-7. The OSD uses a number of menus for making changes and turning the special features on or
off. The configuration can be done via the OSD-keypad (OSD-Panel-Kit).
To start the OSD
press the “OSD” button on the keypad, after switching the power supply on. If a valid
flat panel configuration is installed, the OSD Main Menu will be displayed.
To select an menu point
, simply use the button “UP” or ”DOWN” to move the cursor to the menu point
you want and press the button “OSD”. To get back to the previous menu point press the “CONFIRM”
button.
To select a function,
simply use “OSD”-button to select the field.
Use “UP” or “DOWN” to select a value for that field. With the “CONFIRM” button you can exit the current
function.
5.1
Main Menue
The OSD always starts with the “Main Menu”-screen.
figure 1:
Main Menu