www.kontron.com
CP3923 User Guide
66
4.
Check availability of valid boot image in image1 using the command ‘show bootvar’
(Ethernet Fabric) #show bootvar
Image Descriptions
image1 : Product ID : 1800
Product Variant : 0
U-Boot Release : GA 2.00
Manufacturer ID : 15000
Build-Date : 20100520030324
image2 : Product ID : 1800
Product Variant : 0
U-Boot Release : BETA 1.00
Manufacturer ID : 15000
Build-Date : 20100119185922
Images currently available on Flash
active (image1) backup (image2)
---------------- ----------------
GA 2.00 BETA 1.00
Restart the board
(Ethernet Fabric) #reload
5.
In case of problems with booting the sysetm, last working image2 will automatically be copied to image1. This proce-
dure restores normal system behaviour. Configuration settings made with image1 are lost and shoud be saved by
copying image1 to image 2 before.
6.
It is recommended to copy image 1 to image 2 to have a fully redundant system
(Ethernet Fabric) #copy image1 image2
Copying image1 to image2
(Ethernet Fabric) #
The image will be copied including the configuration settings currently stored for image 1
4.5.2
Updating IPMI
Updating the IPMI firmware is done with the “copy” command. In case that the update procedure fails or the update image
is corrupted, the PM will be able to restart by means of its rollback functionality.
The IPMI firmware package file is provided in HPM.1 format and is stored in the data/update directory of the release direc-
tory tree.
(Ethernet Fabric) #copy tftp://192.168.50.5/cp3923-ipmi-GA-2.00.pkg nvram:ipmi
Flashing a new IPMI firmware will disable the IPMI Controller for some minutes.
Are you sure to update the IPMI firmware? (y/n)y
...
(Ethernet Fabric) #
