Kontron CP-RIO6-001, Руководство пользователя

Страница: 41 / 52

CP-RIO6-001/-DD-216/-HD/-HD-216 Functional Description
ID 1043-5620, Rev. 2.0 Page 2 - 13
The following table describes the signals of the rJ3 connector used on the CP-RIO6-001- /DD-
216/HD-216:
Table 2-11: CP-RIO6-001- /DD-216/HD-216 Rear I/O CompactPCI Connector rJ3 Pinout
PIN Z A B C D E F
19 NC RIO_VCC RIO_VCC RIO_3.3V RIO_+12V RIO_-12V GND
18 NC NC NC NC NC NC GND
17 NC NC NC NC NC NC GND
16 NC NC NC NC NC NC GND
15 NC NC NC NC NC NC GND
14 NC LPa:LINK LPb:LINK LPab:CT1 LPc:LINK FAN:SENSE2 GND
13 NC LPa:ACT LPb:ACT NC NC FAN:SENSE1 GND
12 NC NC NC GND NC NC GND
11 NC NC NC GND NC NC GND
10 NC USB1:VCC USB0:VCC GND RSV USB2:VCC GND
9 NC USB1:D- USB1:D+ GND RSV RSV GND
8 NC USB0:D- USB0:D+ GND USB2:D- USB2:D+ GND
7 NC RIO_3.3V NC ID3 ID4 SPEAKER GND
6 NC RSV RSV RSV RSV RSV GND
5 NC RSV RSV RSV RSV RSV GND
4 NC SP1:RI
SP1:NC SP1:DTR
SP1:NC SP1:CTS
SP1:TX- SP1:TX
SP1:TX+ RSV GND
3 NC SP1:RTS
SP1:NC SP1:RX
SP1:NC SP1:DSR
SP1:RX- SP1:DCD
SP1:RX+ RSV GND
2 NC SP0:RI SP0:DTR SP0:CTS SP0:TX RSV GND
1 NC SP0:RTS SP0:RX SP0:DSR SP0:DCD ID1 GND
Warning!
The RIO_XXX signals are power supply INPUTS to supply the rear I/O module
with power from the CPU board. These pins MUST NOT be connected to any
other power source, either within the backplane itself or within a rear I/O module.
Failure to comply with the above will result in damage to your board.
Table 2-12: CP-RIO6-001- /DD-216/HD-216 Rear I/O CompactPCI Connector rJ3 Signals
SIGNAL DESCRIPTION
SP0 COMA Signaling RS-232
SP1 COMB Signaling RS-232/RS-422
USB0 to USB2 USB Port Signaling
SPEAKER Standard PC Speaker
FAN Fan Sensoring
LPa Rear I/O LAN Port B status information for Ethernet LEDs
LPb Rear I/O LAN Port A status information for Ethernet LEDs