786LCD/mITX Family
KTD-00629-K
Public User Manual
Date: 2009-10-13 Page
60 of 77
8.3.8 Advanced settings – Hardware Health Configuration
BIOS SETUP UTILITY
Advanced
Hardware Health Event Monitoring
System Temperature :47ºC/116ºF
CPU Temperature :48ºC/118ºF
THRM throttle limit [Disabled]
External Temperature Sensor :N/A
THRM throttle limit [Disabled]
Fan1 Speed :Fail
Fan Cruise Control [Disabled]
Fan2 Speed :2678 RPM
Fan Cruise Control [Thermal]
Fan Setting [48°C/118°F]
Fan3 Speed :Fail
Fan Cruise Control [Disabled]
Watchdog Function [Disabled]
IF exceeded, throttle
event will be engaged
Choose impact via
“THRM Throttle Ratio”
in Power->APM menu.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
V02.58 (C)Copyright 1985-2005, American Megatrends, Inc.
Feature
Options
Description
THRM throttle limit
Disabled
38°-80°C (100°-176°F)
IF exceeded, throttle event will be engaged.
Choose impact via “THRM Throttle Ratio” in Power-
>APM menu.
Fan Cruise Control
Disabled
Thermal
Speed
Fan1 is System Fan.
Fan2 is CPU Fan.
Fan3 is Auxilary Fan (via Feature Connector).
When set to Thermal, the Fan will be controlled by
the corresponding temperature sensor (See Fan
Settings below)
When set to Speed, the Fan will be running at the
Fixed speed set by Fan Settings below.
Fan Settings
1406-5625 RPM
30°-75°C (86°-167°F)
The fan can operate in Thermal mode or in a fixed
fan speed mode
Watchdog Function
Disabled
32 seconds
76 seconds
Select either 32 or 76 seconds for the boot process
until the Watch Dog service reloads the counter on
address IO460h.
The value for the counter shall be in the range 04h –
3Fh corresponding to 2.4 - 38 sec. in steps of 0.6
sec.
The Watchdog can be disabled/enabled by writing to
the address IO 469h Bit 3.
