User Guide 3.5-SBC-APL – Rev. 0.1
www.kontron.com
// 11
1/
Introduction
This user guide describes the 3.5-SBC-APL motherboard from Kontron named as 3.5-SBC-APL within this user guide.
The 3.5-SBC-APL is a 3.5” form factor, single board computer based on the Intel® Apollo Lake processor and features:
Intel® Atom™ Mobile processor family with (2 MB Cache, from 2 GHz to 1.8 GHz), Apollo SoC (System-on-Chip)
Intel® Mobile Celeron®N3350 processor with (2 MB cache, at 2.4 GHz) , TDP 6 W
System memory up to 8 GB maximum
1x DDR3L SO-DIMM (1.35 V, 1867 MHz) non ECC memory
3x independent graphic displays: 1x DP, 1x HDMI and 1x LVDS
2x 10BASE-T/100BASE-TX/1000BASE-T Mbit Ethernet (IEEE802.3 conformity)
2x USB 3.0 on the external I/O connector panel and 1 x USB3.0 on the internal header
1x USB 2.0 and 1x USB3.0 on the front panel internal header
1x RS232/RS422/RS485 and 1 x RS232(internal)
TPM2.0 and WIBU security features
2x PCIe mini
Use of this users guide implies a basic knowledge of PC-AT hardware and software. This user guide is focussed on
describing the 3.5-SBC-APL motherboard’s special features and is not intended to be a standard PC-AT textbook. The
configuration and setup of the CPU board is either carried out automatically or manually by the user via the BIOS
setup menus.
Before switching on the power, new users are recommended to study the short installation procedure in the
following chapter Installation Procedures.
For the latest revision of this user guide, datasheet, thermal simulations, BIOS, drivers, BSP’s (Board Support
Packages), Mechanical drawings (2D and 3D), visit http://www.kontron.com/.
