Kontron 104-422-2I, Руководство пользователя

Страница: 31 / 54

2-8
104-422/485-2I User’s Guide
Card Address jumpers are marked A5-A9. The following table lists jumpers name vs. the address
line controlled and the relative weights of each.
Table 2-2. Card Base Address Setup
In order to read the address jumper setup, assign a binary "1" to jumpers that are OFF and a
binary "0" to the jumpers that are ON. For example, as illustrated in the following table, address
selection corresponds to binary 11 000x xxxx (hex 300). The "x xxxx" represents address lines
A4 through A0 used on the card to select individual registers. See Chapter 5, Programming in
this manual.
Hex Range Usage
300-31F Prototype Card
360-36F Reserved
378-37F Parallel Printer Port 1
380-38F SDLC or Binary Synchronous Comm’n 2
3A0-3AF Binary Synchronous Comm’n 1
3B0-3BF Monochrome Display/Printer
3C0-3CE Local Area Network
3D0-3DF Color/Graphic Monitor
3F0-3F7 Floppy Diskette Controller
3F8-3FF Asynchronous Comm’n (Primary)
Card Address Settings 1st Digit 2nd Digit 3rd
Digit
Jumper Name A9 A8 A7 A6 A5
Address Line Controlled
A9 A8 A7 A6 A5
Decimal Weight 512 256 128 64 32
Hexadecimal Weight
200 100 80 40 20