KSwitch D10 MMT Managed Time Sensitive Ethernet Switch - Preliminary User Guide, Rev. 0.99
// 81
9.6.4.
Web Server - View Commands
9.6.4.1.
Show IP HTTP
Description- Use this command to show status information about the secure HTTP web server.
show ip http
Parameter
Description
Parameter
N.A
N.A
Default
N.A
Mode
EXEC Mode
Usage
Display the secure HTTP web server status
Examples
Example
# show ip http
9.6.5.
Telnet/SSH/Web - Configuration Commands
Authentication Method Configuration -
Configures Which Network interface as telnet, SSH, Web or local console
should be enabled or disable, and how remote user us password will be authenticated. Should it be done
locally by the switch or by remote RADIUS/ Authentication Server.
Accounting Method Configuration -
Configures if the switch should send Accounting messages to remote
Accounting server whenever remote user login/logout, and report any CLI command typed by the user over
Console, Telnet or SSH.
9.6.5.1.
aaa Authentication Login
Description- Configures how a user is authenticated when logging into the switch via one of the management client
interfaces - console, telnet, ssh or web. Each one of the interfaces may have up to three authentication servers. In
case the first authentication server is down, then second authentication server will be accessed instead. The same
procedure applies to the third authentication server in case both the first and second authentication servers are
down.
Rejection of remote user by any of the authentication servers will reject the remote user.
The three remote authentication servers are used only as a backup in case one of the
authentication services is down.
Disabling authentication by all three authentication services will disable management
interface (console, Telnet, SSH, Web).
Local- use the switch local user database.
Radius- use remote RADIUS server
Tacacs- use remote server.