KSwitch D10 MMT Managed Time Sensitive Ethernet Switch - Preliminary User Guide, Rev. 0.99
// 40
The distance from the wall mount plate’s mounting holes to the top of the wall mount plate
is 27 mm.
To install on a wall or flat surface, perform the following:
1.
Make sure the mounting surface is clean and smooth and meets the screw’s thickness requirement.
2.
Fasten the wall mount plates to the switch (top and bottom) using the two screws (M3x5) provided. (Figure 7,
pos. 1).
3.
Insert two screws (top and bottom) into the wall mount plate’s groves (Figure 7, pos. 2) and fasten firmly.
Note: The two screws are not included in the Wall Mount Kit as their length depends on the mounting surface
thickness.
4.
Check the switch is attached to the mounting surface securely.