KSwitch D10 MMT Managed Time Sensitive Ethernet Switch - Preliminary User Guide, Rev. 0.99
// 20
4.1.
Faceplate Features
The faceplate supports eight Ethernet ports (cooper and fiber) and indication LEDs.
4.1.1.
RJ45 Copper Ethernet Ports
The RJ45 copper ports labelled 1G ‘1’ to ‘6’ are 10BASE-T/100BASE-TX/1000BASE-T Ethernet ports and the RJ45
copper ports labelled 2.5G ‘1’ to ‘2’ are 10BASE-T/100BASE-TX/1000BASE-T/2.5GBASE-T Gigabit Ethernet ports.
To achieve the specified Ethernet port performance use Category 5 twisted pair cables with 10BASE-T/100BASE-TX
and Category 5E, 6 or 6a or better with 1000BASE-T/2.5GBASE-T Ethernet networks.
When connecting the switch to a PC use a straight-through or a cross-over Ethernet cable and when connecting the
switch to another Ethernet device use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet cables
(for connections up to 100 m/328 ft.).
Figure 4: RJ45 Ethernet Ports
Table 3: Ethernet Ports (RJ45) Pin Assignment
Pin
Signal
1, 2
T/Rx+, T/Rx-
3, 6
R/Tx+, R/Tx-
4, 5
T/Rx+, T/Rx-
7, 8
R/Tx+, R/Tx-
Supported Ethernet Cables:
Use either UTP or STP Cat 5 twisted pair cables with 10BASE-T/100BASE-TX/1000BASE-T
and Cat 5E, 6 or 6a or better with 1000BASE-T/2.5GBASE-T Ethernet networks for
connections up to 100 m/328 ft..