www.ks-power.de/en
|
2
SAFETY PRECAUTIONS
1
- The design of the device includes live parts and assemblies.
- The device may only be operated by trained personnel.
- Make sure the device is grounded before use.
- Place the device so that the control panel is easily accessible.
- Place the device on a flat, solid surface.
- Read the manual carefully.
- Maintenance and repairs should only be carried out by qualified service technicians.
The product is energized. Observe safety precautions
to avoid electric shock.
WARNING - DANGER!
WORK AREA
1.1
- Do not use the product near flammable gases, liquids or dust.
- Ensure that the work area is always kept clean and well lit to avoid injuries.
- Keep unauthorized persons, children and animals away from the running product.
ELECTRICAL SAFETY
1.2
-
Avoid operating the product in high-humidity environments. Do not allow moisture to enter the
product, as this increases the risk of electric shock.
-
Avoid direct contact with grounded surfaces (pipes, radiators, etc.).
-
Be careful when working with the power cord. Replace it immediately in case of damage, as damaged
power cord increases the risk of electric shock.
-
All product connections must be carried out by a certified electrician in accordance with all electrical
codes and regulations.
-
Do not operate the product with your feet in the water, on wet or damp soil.
-
Do not touch live parts of the product.
-
Keep all electrical equipment dry and clean. Replace damaged or worn wiring. Worn, damaged, or
rusted terminals must be replaced as well.
PERSONAL SAFETY
1.3
-
Do not operate the product when you are tired or under the influence of potent drugs,
alcohol or medication. During operation, inattention can cause serious injury.
-
Make sure there are no foreign objects on the product when it is turned on.
-
Do not overload the product, use it for its intended purpose only.
The total power of power consumers connected to the ATS
unit must not exceed the maximum permissible power for
this ATS unit model.
PLEASE NOTE!
