Könner & Söhnen KS 7HP-MFM 60, Руководство пользователя

Страница: 6 / 16

Fig. 3
Fig. 4
Fig. 5
Fig. 6
ASSEMBLY
6
You may need an assistant during assembly.
PLEASE NOTE!
The cables are supplied pre-wired to the control panel.
PLEASE NOTE!
MOUNTING THE FRONT
MOUNTING THE FRONT
AND BRUSH CONTROL CABLES AND BRUSH CONTROL CABLES
Attach the cable eyelet to the corresponding
hole (fig. 3).
MOUNTING THE CONTROL HANDLE
MOUNTING THE CONTROL HANDLE
The handle is supplied pre-attached to the control panel. Mounting
screws for the control handle, fixing screws for the gear shift
mechanism, fastening nuts and bolts for the brush direction lever
are supplied in a separate package contained in the carton with the
machine.
To install the handle, proceed as follows:
1. Bring the two tubes at the ends of the handle (A) to the support (B).
2. Insert the screws into the holes and secure them with nuts.
MOUNTING THE GEAR SHIFT MECHANISM
MOUNTING THE GEAR SHIFT MECHANISM
1. Remove the pre-assembled pivot joint (A) from the gearshift
washer (B) and nut (C).
2. Insert the pivot joint (A) of the gear shift mechanism into the hole
in the lever (D), connecting it to the transmission.
3. Tighten the washer (B) and nut (C) securely.
MOUNTING BRUSH DIRECTION LEVER
MOUNTING BRUSH DIRECTION LEVER
1. Remove the pre-assembled pivot joint (A) from the nut of the brush
direction lever (B).
2. Insert the pivot joint (A) of the brush direction lever into the hole
in the lever (C), connecting it to the drive.
3. Tighten the nut (B).
А
B
B
C
A
D
А
С
В
www.ks-power.de/en | 5