RESIDUAL RISKS
RESIDUAL RISKS
All residual risks cannot be avoided even if the machine is used according to the instructions. Due to the
design features of the power tool, the following hazards may arise:
1. Damage to the lungs if an effective dust mask is not worn.
2. Hearing damage if effective ear protection is not worn.
3. Damage to health from vibration if the power tool is used for extended periods or not properly maintained.
Contact your distributor or local representative to have belts replaced. Do not change them yourself. Repair
and adjustment of the snow blower must be carried out in a safe place away from traffic and other hazards.
Remove spark plug wire before adjusting or servicing.
PLEASE NOTE! Wear a dust mask to avoid getting large
amounts of dust into your lungs! Wear ear muffs to avoid
hearing damage. Do not use the multifunction machine for
extended periods to avoid the harmful effects of vibration
on the human body.
WARNING - DANGER!
STORAGE
10
TROUBLESHOOTING
11
• Do not store the snow blower with a dirty brush. Bristles can deform under load, which will reduce
cleaning efficiency.
• Store polypropylene brushes away from direct sunlight. UV radiation can damage the material and make
it brittle, leading to premature wear of the bristles.
• Store polypropylene brushes away from heat and fire.
Engine will not start
Make sure the spark plug is not damaged
Make sure the spark plug cap is installed correctly
Engine is not working
properly
Make sure the air choke is open
Make sure the fuel is fresh and free of impurities
Brush does not rotate
Check if the V-belt coupling is correctly adjusted
Check the V-belt for damage
Machine is not working
Make sure the V-belt coupling is adjusted correctly
Low cleaning efficiency
Check the V-belt for damage
Check if the brush height is correctly adjusted against the ground
www.ks-power.de/en
|
12
Содержание KS 7HP-MFM 60
Страница 15: ......
