Könner & Söhnen KS 27THG 65/55, Руководство пользователя

Страница: 5 / 15

• Do not reach or step across the beam while the log
splitter is running. This is a very UNSAFE method which
could cause personal injury or even death.
WARNING!
• Never attempt to split wood across the grain. The log
splitter was not designed for cross-grain splitting. Doing
so could damage the log splitter and may cause personal
injury.
CAUTION!
• Make sure both ends of the log you are splitting are cut as square as possible. This will
prevent the log from sliding out of position while under pressure.
Engine switch
OFF ON
air damper
fuel valve
Open Close
Open Close
OPERATION INSTRUCTIONS
4
Proper operation of the log splitter
1). Load a log onto the beam and against the endplate.
2). Serious accidents can happen when other people are allowed inside the work zone. Keep everyone else
out of the work zone while operating the control valve.
3). Make sure hands are clear of crush hazard zones.
4). Push the control valve handle FORWARD with two hands to split the log.
5). Push the control valve handle BACKWARD with two hands to return wedge to its original position.
6). Remove the split wood from the work zone.
www.ks-power.de/en
| 4