3
buttons to adjust the frequency. Press and hold for automatic scan to the next available radio
station. Press the alarm button when ready.
e) Press
”
’
to adjust the volume. Press the alarm button when ready.
f) Adjust the desired brightness at the time the alarm goes off with the
”
’
buttons. Press the
alarm button when done.
g) The
icon appears beneath the alarm time. Press the
”
’
buttons to adjust the time
in advance for the wake-up light to be activated. The light will slowly intensify and reach the set
brightness at the alarm time.
h) After you have set the first alarm, you can set the second alarm by following the same steps.
12. Off: Turns the device off.
13. Reset: Insert a small pointy device into the reset hole near the backup battery to reset the system.
Light (chimney): Used to set the brightness of the lamp. Setting will be remembered for the next time
you turn it on.
Specifications:
Power: 12V 600 mA 7.2 W (adapter input: 100-240VAC, 50/60Hz, 0.2A; Output DC 12V 600 mA).
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system
for these products.
