2
ENGLISH
Bathroom Clock
Open the battery compartment by twisting the cover. Be careful to insert the battery (1.5 V AA - LR06
battery) with the correct polarity (+/-), since a battery inserted in the wrong polarity can cause damage
to the clockwork. Close the battery compartment again.
The clock automatically starts to receive the DCF signal. The time is pre-set to 12 o’clock. After the
batteries are inserted, the clock enters the quick adjustment mode, i.e. the dials move quickly and are
set to 4, 8 or 12 o’clock. A search for the DCF signal will now begin and after successful reception the
dials are automatically set to the correct time. This procedure can last for up to 15 minutes. The time is
automatically adjusted to daylight savings time or summer time.
Note:
The unit is automatically synchronized every day.
Do not place the unit in the vicinity of interfering sources, such as televisions, computers or similar
devices.
Avoid placing the unit next to or on metal plates.
Closed rooms such as airports, cellars, factories and rooms where reinforced concrete is used in the
walls are not recommended.
Do not start the time adjustment in a moving vehicle such as a car or train.
RESET
By pressing the RESET button the search for a radio signal is started manually.
Temperature
The surrounding temperature is displayed immediately after inserting the batteries.
The radio controlled bathroom clock can be used at a permanent ambient temperature between 0°C to
+ 40°C. The clock should be exposed to temperatures from -10°C to -1 °C and 41 °C to + 45°C for only
a short time. When the batteries are removed, the radio controlled bathroom clock can be stored at
0°C to + 40°C.
Mounting Using Suction Cups
The suction cups of your radio controlled bathroom clock are used for attachment to smooth surfaces
such as tiles (the tiles should be polished, the suction cups do not adhere to matt tiles), mirrors and
glass surfaces etc. Moisten the suction cups before attaching to improve the suction.
Note:
The suction cups adhere only to smooth surfaces.
Since the suction cups, similar to all other suction cups, can detach after a while, press them firmly
against the surface occasionally and check the adherence of the radio controlled bathroom clock.
Do not attach your radio controlled bathroom clock within the shower area, since the clock is protected
only against moisture. Intensive contact with water could lead to malfunction.
The surface where you want to mount your radio controlled bathroom clock must be free of dust and
grease. We recommend that the surface is cleaned with a cleansing agent.
Mount your radio controlled bathroom clock in a place where nothing could be damaged if the clock
detaches itself and falls. Please note that glass breakage is not covered by the warranty.
Avoid attaching one of the suction cups directly over a tile joint, since no vacuum will develop and the
suction cup will not hold.
Detaching the Suction Cups
When you want to detach the radio controlled bathroom clock from a surface, please lift the suction
cups at the edge, one by one. This enables air to enter underneath the suction cup and it will detach
from the surface.
