9
Problem
Possible causes
What to do
No signal or weak signal.
Check the cable connections,
LNB and other equipment
connected between the LNB and
the receiver, or adjust the dish.
The satellite dish is not pointing
at the satellite.
Adjust the dish.
Signal is too strong.
Connect a signal attenuator to
the LNB input.
Satellite dish is too small.
Change to a larger dish.
LNB noise factor is too high.
Change to an LNB with lower
noise factor.
Bad picture / blocking error.
The LNB is faulty.
Change the LNB.
The battery is exhausted.
Change the battery.
The RCU is not working.
RCU is incorrectly aimed.
Aim the RCU at the receiver, or
check that nothing blocks the
front panel.
Note:
If you have tried all of the actions suggested above and the problem is still not solved, please contact
your dealer or service provider.
Safety precautions:
To reduce risk of electric shock, this product should
ONLY be opened by an authorised technician
when service is required. Disconnect the product
from mains and other equipment if a problem
should occur. Do not expose the product to water
or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without prior notice.
- All logos, brands or brand logos and product names are trademarks or registered trademarks of their
respective holders and are hereby recognised as such.
- This manual was produced with care. However, no rights can be derived. König Electronic cannot
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
