Konig CMP-NWIPCAM10, Руководство пользователя

Страница: 24 / 28

The setting method is as follows:
Configure the IP network camera according to step 1.
IP assignment mode: Select the STATIC option and
set an IP address in the same network segment of the
ADSL modem (for example, if the default IP address
of the ADSL modem is 192.168.1.1, set the IP
address of the IP network camera to 192.168.1.2).
Subnet mask: Sets to 255.255.255.0.
Default gateway: Set this to match the IP address of
the ADSL connection.
Configure the options of the ADSL connection and
enter the PPPoE dial-up account and password.
Enter the IP address of the ADSL modem in the
Address bar of the browser, and then enter account
and password in the dialog box appearing to enter the
modem setting page.
Enter the ATM setting page of the modem and set
ATM parameters: VPI/VCI values to be queried from
local telecom service provider; encapsulation type is
LLC; connection type is PPPoE; security protocol is
PAP.
Enter the ADSL account and password in the user
name and password fields, and then click <
Submit >.
Set the NAT function of the ADSL modem.
Enter the Network Address Translation (NAT) setting
page of the ADSL Modem.
Select the option of adding new rules, select
REDIRECT for Rule Flavor and TCP for Protocol .
Set destination port and local port to 80, set local
address to the IP address of the IP network camera,
for example, 192.168.1.2, and set the IP address of
the public network to 0.0.0.0.