Konig CMP-NWIPCAM10, Руководство пользователя

Страница: 13 / 28

14. Network Setup
The Network window is shown in the figure below:
IP Assignment
This option can be used to change the network
connection mode of the IP network camera. The
preset mode is
Static .
The MAC Address field shows the MAC address of
the IP network camera.
If it is set to Static, enter the following parameters:
IP Address : IP address of the IP network camera
Subnet Mask : preset to 255.255.255.0
Gateway : Default gateway
If it is set to DHCP, it is not required to set the above
parameters, but it is necessary to set the IP address
of the DHCP Server in the Server menu.
If it is set to PPPoE, it is necessary to enter the
correct ID and Password.