3
3.4 Start to Use
1. The docking supports 2.5” or 3.5” SATA HDD directly plug in to the SATA connector , which
is instructed by below photo 1 and 2.
2. You can easily hot-swap the HDD by directly pulling it out from the docking , which is
instructed by below photo 3 and 4.
4. Using the Docking
4.1 In Windows 7(32bit), Vista, XP, 2000 and Mac OS
The Docking can work under Windows 7(32bit)/Vista/XP/2000 and Mac OS without any
extra driver.
Note:
1. If you can see the USB icon, but can’t fi nd new disk appearing in your computer, please
check if the hard disk was partitioned.
2. If HDD has been partitioned, please make sure the format of your HDD is FAT32.
Because Windows 98 doesn’t support NTFS format of HDD.
