KONIG+NEURATH TALO.S, Руководство по сборке

Страница: 23 / 38

20
Assembly instructions
TALO.S desk system
These assembly instructions include all the information needed to assemble and
reconfigure the TALO.S range.
The individual steps are numbered as required and the different screw and spanner
sizes are given.
The TALO.S desks are not suitable for use in the workshop or warehouse, not in
wet areas / damp conditions.
(b)
(c)
(a)
(b)
1.
Manual height ad
-
justment
To adjust the desk height,
loosen the wing nut (a) slightly.
Adjustment is made at 10 mm
intervals, in the range 650
-
850 mm as indicated on the
scale.
When the desk is at the desi -
red height, tighten the wing nut
(b).
The lower levelling glide (c) is
used for height adjustment
to compensate for uneven
flooring.
Adjustment is springassis -
ted, which cushions the
weight. To adjust, the desk
must be in an upright posit
-
ion ready for use, otherwise
there is a risk of injury!
2.
Comfort height ad -
justment
Upwards (a):
Push button upwards, set re -
quired height and release but -
ton.
Downwards (b):
Push button upwards, lift the
table top slightly and press
downwards, set required
height and release button.
Note: the fitting of extension
elements is not possible.
(a)