Please read these assembly instructions carefully!
SAFETY INSTRUCTIONS
The safety of the stand depends on the:
GENERAL
Perform visual inspection before use:
Damaged components must not be used
- or only after a qualified repair or after
an exchange.
ROUND BASE
Handle with care due to the heaviness, in particular,
do not drop (danger of crushing).
MOUNTING
Ensure that all screw connection are tight.
SURFACE
Only use the stand on suitable, i.e. level and
stable floors.
LOAD
Only for suitable 500ml bottles);
see above TECHNICAL DATA.
SURROUNDINGS
Negative external influences (knocks, dragging
around, vibrations, wind, wetness etc.) are to be
avoided or prevented.
HANDLING
When changing the direction of the dispenser bottle
always turn the entire stand. Never loosen the thread
b.2
of the desinfactant holder
b
.
INSTALLATION INSTRUCTIONS
Please carry out a visual check if all parts are
complete and as far as visible in order.
Provide the necessary keys.
A. COMPONENTS
a
.1
Round base
b
.1
Dispenser holder
b.1
Drip cup ø 70 mm
b.2
Threaded bolt M6
c
.2
Elbow dispenser with PET bottle
d
.2
Base tube
Accessories bag (6-80320-1-00)
e.1
Lock nuts M5-DIN985 (3x)
e.1
- wrench SW8
e.2
Washer ø 5,3 mm (3x)
e.3
Rounded head screw M5 x 16 mm (3x) - Phillips screw Z2
B. DIMENSIONS
including hole pattern for dispenser mounting:
A. 40 x 169 mm (for 500 ml bottle dispensers included)
B. 40 x 203 mm (for 1000 ml bottle dispensers not included)
C. STAND
1.1
Place the round base (with rubber insert)
a
on the floor,
1.2
screw the base tube
d
with the external thread into
1.2
the round base
a
as far as it will go.
D. DISINFECTANT HOLDER and DRIP CUP
2.1
Screw in the threaded bolt
b.2
of the dispenser holder
b
2.1
into the base tube
d
as far as it will go.
2.2
The drip cup
b.1
can be removed for cleaning purposes.
2.2
Subsequently press the drip cup from above back
2.2
into the holder.
80328 Disinfectant stand
80328
including dispenser
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
80328-000-55/76 Rev.01/Rev.04 03-79-926-00 10/20
TECHNICAL DATA
STAND
- Total height: 1280 mm
- Height support: 820 mm
- Round base: ø 275 x 41 mm
- Base tube: ø 20 x 800 mm
MATERIAL
- Round base: steel, galvanized, PA, TPE
- Base tube: steel
SURFACE black (-55), powder-coated
pure white (-76), powder-coated
DISINFECTANT HOLDER
- Mounting hole patterns for dispensers:
-
a. 350/500 ml: 40 x 169 mm
-
b. 1000 ml: 40 x 203 mm
- drip cup: ø 70 x 47 mm
MATERIAL
- Bottle holder: steel, polyamide
- Thread: steel, brass, zinc
SURFACE black (-55), powder-coated
pure white (-76), powder-coated
DISPENSER
Elbow dispenser with removable PET bottle
- Dimensions: W x D x H = 83 x 160 x 243 mm
- Bottle content: volume = 500 ml
MATERIAL aluminum, steel, ABS, PET
WEIGHT overall: 5.1 kg
A + B
Hole pattern for
dispenser mounting
A. COMPONENTS
B. DIMENSIONS
C.
STAND
D.
DISPENSER
HOLDER
