Fault and troubleshooting
Fault/cause
Check/Remedy
Mount wobbles on the wall
● Check screw connection between wall and mount and
●
retighten if necessary.
Microphone desk arm cannot be
inserted into wall mount
● Open the clamping screw on the wall mount. Check the
●
mounting diameter on the microphone desk arm.
Maintenance, cleaning and repair
u
Maintenance:
Regularly check if the screw connections are tight.
u
Cleaning:
Use a slightly damp cloth to clean the wall mount. Do not use chlorinated
u
or abrasive cleaning agents. These will cause damage to the surface and varnish.
u
Repair:
Immediately repair any damage that occurs and stop using the wall mount.
u
Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u
are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u
spare parts list by entering the article number on the type label. Use this page to reorder
u
missing or damaged components.
3.) Mount microphone desk arm.
!Due to the moveability of the components, there is a risk of crushing between them!
Loosen the clamping screw on the wall
mount. Insert the microphone desk arm into
the wall mount from above, adjust to the
desired position and hand-tighten the
clamping screw.
