23856 Wall mount for
microphone desk arms
Information for use
Intended use
The wall mount is used as an accessory for the microphone desk arms 23840/50/60/65. With this
mount, a microphone desk arm can be attached to a wall. Due to the numerous mounting opti-
ons, the position of the microphone desk arm can be adjusted to almost any purpose.
Foreseeable misapplication
The clamping screw on the wall mount may not be opened during use. The load-bearing capacity
of the used microphone desk arm must be observed.
General
u
It must be guaranteed that the wall bracket can be firmly connected to the wall.
u
u
The wall must have sufficient load-bearing capacity and be able to absorb the additional
u
u
forces.
u
u
Depending on the wall condition, the correct fastening material must be chosen.
u
u
Pay attention to any piping or electrical wiring that may be routed.
u
Observe the mounting instructions for the fasteners used.
u
The installer must be physically fit and technically competent and familiar with current applica-
u
ble local/state regulations.
u
Dropping of the wall mount including the microphone desk arm may cause personal injury and
u
property damage.
u
Due to the adjustment possibilities, there is the risk of squeezing between the components.
u
The user must be physically fit and technically competent.
u
The usage information is an integral part of the product and should be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
