SAFETY INSTRUCTIONS
MOUNTING INSTRUCTIONS
The mounting of the 21463 is easy to handle
1
screw-in both locking knobs
2
loosen the locking knob on the base clamp
3
spread legs apart to max. base width
4
braces should come into a horizontal position
5
tighten locking knob
2
5
NOTE:
5
Do not over tighten the locking knobs.
5
This will result in undue stress to the fitting.
5
Just enough to hold the extensions position firmly.
SPECIFICATIONS
Thank you for choosing this product. This instruction manual informs you about the important steps to set up
and handle the product. We recommend to keep the manual in a place for a possible later use.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21463-000-55 Rev.13 03-80-212-00 1/19
- max. centric load: 50 kg
- Before and after use check stand for damage.
-
Damaged Stands may not be used.
- before use:
-
- check the functional capability of: K&M-stand, speakers
- -
and tools concerning: completeness, integrity, usability
-
- Changing the height of the loudspeaker is easy with the
- -
integrated 25 kg pneumatic spring. It is nonetheless
- -
recommended that two installers, who are able to lift the
- -
load of the speaker stand when loaded with a speaker, are
- -
responsible for setting up and dismantling the stand.
-
- optimal stability conditions:
-
- use only on even and stable surface
-
- avoid off-center loading
-
- set up brace
4
in horizontal position
- safety in operation:
-
- unauthorized persons should keep distance to protect
- -
from stumble and tilting
-
- inspect bolted assemblies regularly
-
- always insert the safety pin after positioning of
- -
the speaker
-
- do not push and pull the loaded stand on the floor;
- -
it can cause damages on the base
-
- safety in maintaining and removing
-
- first remove load
-
- pay attention to possible hazards (squeezing, hurting)
- -
by collapsing
Material
baserods: Alu
extension, braces, locking pin: steel
clamps: zinc die-cast
foot rubbers: (TPE)
Capacity
max. 50 kg centric load
Dimensions
foot circle: diameter 1320 mm
height: 1395 - 2145 mm (by max. foot circle)
extension: diameter 35 mm
Collapsed, kg
1170 x 145 x 126 mm, 6,0 kg
Card box, kg
1185 x 130 x 120 mm, 6,7 kg
Accessories
(optional)
bag 21311 (for one or two 21460)
K&M-flange adaptor (e.g. 19580, 19656)
K&M-screw-on-adaptor 24281
K&M-sleeve adaptor 21326 (ø 38 mm)
21463 Speaker Stand
with pneumatic spring
- load capacity: 50 kg
- easy and controlled extension and retraction with the integrated 25 kg pneumatic spring
- professional, solid, transportable
- similarly adapted for home, property, public area
- Height: min. 1395 mm / max. 2145 mm; foot circle: 1320 mm; extension ø 35 mm
