CHECK, MAINTENANCE, CLEANING
- Careful handling of the trolley maintains the load-bearing capacity,
-
mobility and safety of the installation.
- Please carry out any maintenance work in unloaded condition and
-
consider any hazards (jamming, bumping, tipping).
- For cleaning use a slightly damp cloth and a non-abrasive cleaning
-
agent.
FAULT-FINDING (F) and REPAIR (R)
TECHNICAL DATA
F: Trolley wobbles R: Take care of floor unevenness
F: Trolley moves apart R: Retighten screw connections
g-h-i
F: Trolley rolls inadvertently R: Apply the brakes of the two locking
R:
casters
R: Do not place the trolley on an inclined
R:
surface
F. Digital upright piano wobbles R: Adjust position of the felt pads
m
,
n
F: Digital upright piano slides R: Correct the distances between the
R:
caster brackets
a
,
b
-
c
,
d
2.-8. ASSEMBLY and HANDLING
7. FELT PADS
7.1
POSITIONING
7.1.1
The position of the felt pads depends on the digital upright piano.
7.1.2
Place the four 2 mm thick felt pads
n
on the two caster brackets
c
,
d
.
7.1.3
Place the two 5 mm thick felt pads
m
on each of the two small
a
,
b
7.1.3
caster brackets.
7.2
MOUNTING
7.2.1
Remove the protective paper and glue the felt pads on the designated
7.2.1
place of the frame.
8. TIPS
8.1
We recommend refraining from changing the set distance.
8.2
However, it may become the necessary to make new adjustments…
8.2
…when changing the digital upright piano,
8.2
…to collapse the trolley to the smallest footprint possible
8.2
(for example, for transport or storage purposes)
8.3
When adjusting the trolley follow the steps as described (see
3
-
7
)
8.4
Please observe that the rolley lifts the digital upright piano by ~25 mm.
8.2
so that you may have to adjust the seat.
9.-12. IN USE
9. PLACING the DIGITAL UPRIGHT PIANO
9.1
The brakes on the two locking casters
a
,
b
should be engaged. For this
9.1
purpose, press the brake pedals with your foot.
9.2
We recommend that at least two professionally competent and physically
9.2
fit persons lift the instrument, and a third person takes care of the correct
9.2
alignment.
9.3
The digital upright piano must be placed on the trolley with due care.
10. STAND/PLAY MODE
10.1
Ensure that the brakes on the locking casters
a
,
b
are engaged. See
9.1
.
10.2
The placement of the feet on to the trolley this not permitted.
10.3
Do not place the trolley (even unloaded) on an inclined plane, even if
10.3
the casters brakes are locked.
11. TRANSPORT MODE
11.1
Hold the digital upright piano. Now, with care and strong footwear, release
11.1
the locking casters with your foot.
11.2
When moving the trolley please always guide the digital upright piano with
11.2
your hands. The unchecked shifting of the trolley may constitute hazards
11.2
and is not allowed.
11.3
In case of unfavorable ground conditions (soft surfaces, obstacles, steps,
11.3
inclined planes) increased caution is required. If necessary, please seek
11.3
the help of other persons. This applies particularly in the case of transport
11.3
(vibrations, tipping,) but also in the case of stationary use.
12. SUPPORT for PEDAL UNIT
12.1
Digital upright pianos sometimes have pedal units that rest on the floor.
12.1
If the digital upright piano is placed on the trolley, a 25 mm high gap results.
12.2
In the accessory bag you will find a spacer washer with felt pad
o
, which
12.2
can be placed under the pedal unit of the digital piano if necessary.
7.-8. ADAPTING the TROLLEY to the
7.-8.
DIGITAL UPRIGHT PIANO
9. PLACING the DIGITAL UPRIGHT PIANO
10. STAND/PLAY MODE - 11. TRANSPORT MODE - 12. SUPPORT for PEDAL UNIT
Material
Profiles, plates, brackets: Steel, powder coated black
Screws, disks: Steel, galvanized
Spacer washer: aluminum, felt ring, black
Plastic parts: PA, PE, black
Dimensions
Outer dimensions (W x D x H): 1110 x 475 x 80 mm
Piano support (W x D): 1038-1525 x 304-526 mm
Support height / Spacer washer with felt pad: ~25 mm
Cardboard
1055 x 565 x125 mm
Weight
10.4 kg
