SETUP INSTRUCTIONS
18804 Trolley for digital upright pianos
INTENDED USE
The 11804 Trolley is a flexible base for digital upright pianos, making them mobile on
stage, in a studio, rehearsal room and in your home.
Furthermore, the trolley is not only suited for transport but thanks to the low storage
height (25 mm), you can leave the digital upright pianos on the trolley while playing.
FEATURES and CAPABILITIES
- The Trolley is, as far we know, suited for all current digital upright pianos
- Stepless variable width (1038-152 5mm) and depth (304-526 mm)
- The Trolley glides smoothly on eight high-quality casters:
-
- ø 50 x 18 mm, - ball bearing, - steel housing, - TPE rubber tyres
-
- two of the casters are fitted with a brake and can be locked and fixed using
-
-
your foot
SAFETY NOTES
1. COMPONENTS
Please visually inspect whether all parts are
complete and in order, as far as recognisable.
The trolley is largely pre-assembled and consists of:
a
Caster bracket small, right (2 casters, 1x lockable)
b
Caster bracket small, left (2 casters, 1x lockable)
c
Caster bracket, left (2 casters)
d
Caster bracket right (2 casters)
e
Connecting angle
ACCESSORY BAG:
f
4x Protective caps SW8 ø 11 mm (to cover the side threads)
g
2x Locking nut M5
h
2x washer ø 5,3/15 mm
i
2x Carriage bolt M5 x 15 mm
k
spanner SW8/SW13
m
2x Felt pad d=5 mm, self-adhesive (for:
a
/
b
caster bracket small left / right)
n
4x Felt pad d=2 mm, self-adhesive (for:
c
/
d
caster bracket left right)
o
Spacer washer with felt pad ø 60 x 25 mm
2.-8. ASSEMBLY and HANDLING
2. ASSEMBLING the two sets of SCREWS (g-h-i)
2.1
Each of the two caster brackets
c
,
d
is initially fastened to the connecting
2.1
angle
e
with only one screw
2.2
Push both caster brackets
c
,
d
apart a little.
2.3
Remove the two sets of screws
g-h-i
from the accessory bag and now
2.3
fasten both caster brackets to the connecting angle
e
with a second
2.3
screw connection.
3. PREPARE the TROLLEY
3.1
Lay the trolley with the caster wheels pointing upwards.
3.2
Remove the side protective caps
f
3.2
NOTE: In case of initial installation, these caps
f
are still in the
3.2
NOTE:
accessory bag
3.3
Loosen all 12 locking nuts
g
(approx.1 turn) with spanner SW8
k
.
3.4
Carefully put the trolley back on its casters
4. DEPTH SETTING
4.1
Measure the depth of the digital upright piano and extend the two
4.1
caster brackets, small
a
,
b
accordingly (max. 526 mm).
4.2
Tighten the four side locking nuts
g
;
4.2
finally press on the four protective caps
f
.
5. WIDTH SETTING
5.1
Measure the width of the digital upright piano and extend the two
5.1
caster brackets
c
,
d
accordingly (max. 1525 mm).
6. FIX the SELECTED SETTING
6.1
Turn the trolley again with the caster wheels pointing upwards.
6.1
NOTE: To ensure that the selected DEPTH
4
and WIDTH
5
are not
6.1
NOTE:
unintentionally shifted, we recommend working with two persons
6.2
Tighten the eight remaining locking nuts
g
with spanner SW8
k
6.3
Place the trolley back on its casters.
6.4
Press the caster locks
a
,
b
. As soon as they click in place the trolley is
6.4
secured against unintentional rolling away.
GENERAL
- Please consider the information provided in the setup instructions.
- Please also follow the individual digital upright piano safety instructions.
- The option that the product is adjustable, can result in the risk of pinching/wedgingof your fingers.
-
Careful and attentive handling during setup, operation, and disassembly is indispensable.
- Protect against moisture or, if necessary, promptly dry components
OPERATION
- Prior to use check to ensure that the system is fully functional and complete.
- Damaged parts must be repaired or replaced prior to use.
- Ensure that the stand is stable prior to use - This is insured through adjusting the trolly to the
-
respective dimensions of the various instruments.
- Ensure that the screws are tight on all of the involved products.
- During transport the ensemble may only be moved by ensuring that the digital upright piano is being
-
held manually
- Do not place the trolley (even unloaded) on an inclined plane.
- When using the trolly stationary, both caster brakes must be locked.
- In the case of poor surfaces (soft surfaces, inclined planes, stairs, obstacles among others) please
-
be particularly careful. This applies to both transport and stand operation (possible hazards are:
-
vibrations, rolling, tipping, bumping).
- Placement of the feet on to the trolley this not permitted.
- To care for the product, use a damp cloth and a non-abrasive cleaning agent.
Thank you for choosing this product. Please read and follow these instructions carefully. They inform you
about all necessary and important steps concerning safe installation and operation. We recommend that
you keep them for future reference.
1. COMPONENTS
2. ASSEMBLING the two sets of SCREWS
3. PREPARE the TROLLEY
4. DEPTH SETTING - 5. WIDTH SETTING - 6. FIX the SELECTED SETTING
Bottom view
Outer dimensions (B x T)
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
18804-000-55 Rev.5b 03-80-434-00 5/21
