13440 Orchestra chair
FOR PROFESSIONAL USE
- Versatile uses and very solid
- The four-legged frame consists of extremely robust 20 x 2 mm steel tubes
and is covered in black-powered coating.
- Height and depth adjustable
- The adjustment to the quality gas pressure lift operates pneumatically
and is done variably via the adjustment lever
- With ventilation holes and breathable foam cushion
- Seat and back are made of flame retardant materials
- The 4 legs have low-noise and movable plastic glides
that adjust to the floor
- Stackable, i.e. space-saving storage (up to 4 chairs)
- Including stocking grooves
SAFETY NOTES
Thank you for choosing this product. This instruction manual informs you about the
important steps to set up and handle the product. We recommend to keep the manual
in a separate place for a possible later use.
- Prior and after use of the orchestra chairs please perform visual
-
inspection and check for completeness and functionality as well
-
as possible damage.
- A damaged chair may not be used i.e. it may only be used after
-
a qualified technician has repaired the chair.
- Only a maximum of 4 orchestra chairs may be stacked.
-
In addition, stacking results in instability and overloading, which
-
represents a possible risk.
- Only use on suitable surfaces, i.e. on even surfaces that are
-
load-bearing
- Please ensure that the orchestra chairs are cared for with the
-
appropriate diligence to maintain functionally, useful life
-
and finally ensures safe use of the chairs for musicians.
INSTRUCTION MANUAL
COMPONENTS (A.1 - B.4)
The box contains the pre-assembled
A. ORCHESTRA CHAIR
as well as the
B. BACKREST
First perform a visual inspection, to ensure if the parts are there
and in working condition. Examples include:
A.1. Cushion seat: Intactness, firm seating…
A.2 Seat mechanism: Cushion, all screws are included…
A.3. Base: Stable, powder coating…
A.4. Operating lever: Condition, functionality…
A.5. Plastic glides: Included, functionality…
B.1. Cushion backrest: Intactness, functionality…
B.2. Screws: All parts included, firm seating…
B.3. Seat tube: Condition, powder coating…
B.4. Extension lock: Seat, functionality…
ATTACH the BACKREST
1
Loosen the clamping screw of chair back a bit
2
Place the backrest tube into the holding tube of the chair
back…
3
…at the same time press the extension lock button…
4
…and place the holding tube in the holder opening until the
4
button of the extension lock clicks.
5
Then re-tighten the clamp screw
DISASSEMBLY
6
A pin bolt located under the pneumatic mechanism ensures
6
that the holding tube can be removed from the holder opening
6
of the seat.
7
It can only be completely removed by consciously pressing the
7
locking pin.
7
This can be useful for transport purposes.
COMPONENTS (A.1 - B.4)
ATTACH the BACKREST (1-7)
