12162 Tray
Information for use
Intended use
The tray is an extension of the DJ table 12160. It can be used to create a second level to set
aside various equipment. The height and incline of the tray can be adjusted. Furthermore, the
support plate can be mounted onto the mounting bracket in three different positions.
Foreseeable misapplication
Always adjust the height or incline without load. Do not transport the tray when mounted or loa-
ded. It is not allowed to incline the support plate backwards during use.
General
u
The tray must be firmly screwed to the DJ table.
u
Always adjust the tray without load.
u
To prevent the equipment from falling, the incline may only be adjusted within the permissible
u
range. If the incline is set too flat or too far to the rear, the equipment placed can slip off the
u
support plate.
u
Observe the maximum load capacity of the tray and the DJ table.
u
The DJ table must stand on a level and stable surface.
u
Observe the information for use of the DJ table.
u
Falling over or dropping the tray can cause personal injury and damage to property.
u
Due to the adjustment possibilities, there is the risk of squeezing between the components.
u
The user must be physically fit and technically competent.
u
The usage information is an integral part of the product and should be kept for its service life
u
or passed on to any subsequent owner or user.
Warranty
No warranty is given for damage caused by:
u
Non-observance of the usage information and the "General safety and assembly instructions".
u
Unsuitable or improper use.
u
Incorrect installation or commissioning by the buyer or third parties.
u
Natural wear and tear.
u
Careless handling.
u
Improper modifications or repair work by the buyer and third parties.
u
Impact on components of foreign origin.
u
Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manu-
facturer's approval.
