Mounting
!Due to the movability of the components, there is danger of crushing between the them!
1.) Unpack and check product for damage and completeness.
Technical data
Material
Support plate, bracket, support tube: Steel, powder-coated black
Clamping screws, carriage bolts, washers: galvanised steel
Locking discs: Die- powder-coated black
Guide bushing, sleeve, protective caps, clamping screw: plastic, black
Load capacity
7 kg
Dimensions and
adjustment range
Support plate : 400 x 300 mm
Height: Stepless 150 mm
Incline: 0°- 32° in 8° steps
Packaging
430 x 315 x 80 mm
Weight
2.5 kg
1
Support tube
2
Support plate
Accessories bag:
3
Clamping nut, washer, carriage bolt
4
carriage bolt, locking discs, clamping
4
nut, washer
2
4
1
3
2.) Assembly of the support plate
Place the support plate with the mounting
bracket facing upwards. Take the carriage bolt,
locking discs, clamping nut and washer from the
accessory bag. Insert the carriage bolt from the
left into the square hole. Connect one locking
disc together with the mounting bracket. For
better orientation, the marking on the locking
disc should point upwards. Place the second
locking disc, also with the marking facing up-
wards, against the first locking disc. Connect the
support tube together with the locking disc. Slide
the washer over the screw and tighten the clamping nut hand-tight.
