- 16 -
4
Installation of wall brackets
The holes of each group must be on the
same line in transversal direction and
vertical direction.
Mark the height on the wall and locate the
drill hole positions for the wall
brackets.Drill the holes with masonry drill
of 12mm diameter,The depth of the hole is
above 100mm. The number of holes and
the distance between the holes should
according to the above pages
《
Distance
between neighboring wall brackets
》
Put the expansion bolts through the
wall bracket, then plug the expansion
bolts into the above-mentioned
hole
，
Check and ensure all wall
brackets lies on same horizontal line
before tightening all nuts.
(Note: the nut and washer might be
separated from the bolt during the
process of transportation, please put
them back into their original positions
before hammer them into the wall during
installation.)
Expansion
bolt
Washer
Nut
Bolt
Make
sure a
ll the w
all bas
es are
on the
same
horizo
ntal lin
e
(Wall brackets number please refer to page 2 parts list.)
14 parts list.)
