background image

E-1

INSTALLATION MANUAL

A3ER-9550-00

SD-511 

Saddle Stitcher

Caution:

Lifting the machine in an awkward position or 
transporting it in a poorly balanced position could 
result in personal injury. When transporting the 
machine, assign an adequate number of persons 
to the job and ensure that each person can take a 
good position of not being excessively loaded.
(mass: approx. 23 kg (50-11/16))

I. Accessory parts

Note:

This manual provides the illustrations of the acces-
sory parts and machine that may be slightly different 
in shape from yours. In that case, instead of the 
illustrations, use the appearance of your machine to 
follow the installation procedure. This does not 
cause any significant change or problem with the 
procedure.

No.

Name

Shape

Q’ty

1. Exit tray

1

2. Exit tray cover

1

3. Exit lever

1

4. Guide plate

1

5. Rail (Right)

without hook

1

6. Rail (Left)

with hooks

1

7. Screw

6

A3ERIXC001DA

A3ERIXC002DA

A3ERIXC003DA

A3ERIXC004DA

A3ERIXC005DA

A3ERIXC006DA

9654

8. Installation 

manual

1

set

After unpacking, be sure to get rid of the 
packaging materials and keep them out of 
the reach of children.
Putting the head in the plastic bag 
involves danger of suffocation.

No.

Name

Shape

Q’ty

4980IXC019DA

Applied Machine: FS-534

Содержание SD-511












Отзывы:

Похожие инструкции для SD-511