Konica Minolta Minoltafax 1400 Скачать руководство пользователя страница 52

Страница: 52 / 157

Sending documents

Rev. 1.1.1/22.10.99

MF 1400

4-1

Sending documents

4.1

Please observe the following!

Characteristics of documents to be transmitted

Up to 20 documents (with same format and thickness) can be placed
in the document feeder. The documents must not be larger or smaller than
the following dimensions:

CAUTION

Observe the following instructions!

➜

If a document is longer than 1500 mm, the fax machine will recognise
this as a jammed document and stop the transmission.

➜

All paper clips and staples must be removed from a document before
inserting it into the fax machine.

➜

Ink, adhesive and correction fluid must be completely dry before
inserting a document into the fax machine.

➜

Yellow, green-yellow and light-blue text will not be transmitted.

➜

Do not insert carbon paper, or paper coated with wax or plastic.

Maximum document width

Minimum document width

500

216 mm

184mm

Feed

direction

Feed

direction

Actual sensing width

208 mm

Feed

direction

With one document

With numerous documents

Paper thickness

0,05 to 0,15 mm

0,08 to 0,13 mm

Содержание Minoltafax 1400






























































































































































Результаты поиска

Содержание Minoltafax 1400

Отзывы:

Konica Minolta Minoltafax 1400, Руководство пользователя, Страница: 52 / 157

Результаты поиска

Содержание Minoltafax 1400

Отзывы: