Konica Minolta magicolor 7450, Руководство по обслуживанию

Страница: 192 / 346

Field Service Ver. 1.0 May 2006 11. SERVICE MENU
155
magicolor 7450
Adjustment / Setting
L. TEMPERATURE 2
M. FUSER LOOP ADJ
Functions • To adjust individually the temperature of the Fusing Pressure Roller for each type of
paper, thereby coping with varying fusing performance under changing environmen-
tal conditions.
Use • When fusing performance is poor, or wax streak or offset occurs when the type of
paper is changed or environmental conditions change.
• By setting the temperature higher (+), gloss of print or OHP transparencies can be
improved.
• By setting the temperature lower (-), Exit Roller mark or uneven transparencies of
OHP can be reduced.
Adjustment
Range • The default setting is 0 °C.
THICK 3 : 0 °C to +10 °C (1 step: 5 °C)
Others
:-10 °C to +10 °C (1 step: 5 °C)
Adjustment
Instructions If fusing performance is poor, increase the setting.
If wax streaks occur, decrease the setting.
If offset is poor, decrease the setting.
Setting/
Procedure 1. Select [TEMPERATURE 2] and press the MENU/SELECT key.
2. Select desired paper type with the Up key
U
/Down key
V
and press the MENU/
SELECT key.
3. Select desired setting value with the Up key
U
/Down key
V
and press the MENU/
SELECT key.
Functions • To vary the timing to start fusing loop processing and adjust the fusing loop size at
Envelope printing.
Use • To be used when paper wrinkle or transfer misalignment occur at Envelope printing.
Adjustment
Range • The default setting is “0.”
-2 to +2
Adjustment
Instructions Adjustment in +: Delay the timing to start fusing loop processing
Adjustment in -: Put ahead the timing to start fusing loop processing
Setting/
Procedure 1. Select [FUSER LOOP ADJ] and press the MENU/SELECT key.
2. Select desired setting value with the Up key
U
/Down key
V
and press the MENU/
SELECT key.