Konica Minolta IC-301, Руководство пользователя, Страница: 169 / 212

Setting Parameters in the Job Parameters Window 161
You can adjust your page size by adjusting the trim size.
Trim orientation
specifies the orientation, portrait or landscape, for
the trim size. If the wrong orientation is specified, an unsuitable
template might be selected and the job might be cropped as a
result.
Templates
Category
1.
In the
Columns
list, select the number of pages to place
horizontally. The rows and columns indicate how the pages will
be placed on the sheet.
2.
In the
Rows
list, select the number of pages to place vertically.
Print method
¾
Select the desired layout—for example,
Duplex HTH
or
Duplex
HTT
.
North south
¾
Select this check box if the template you chose is either step
and repeat 2×1 or 1×2. The pages will be placed 180 degrees
from each other, on the same side of the imposed sheet.
Note: If you set the trim size to be smaller than the page size set in the DTP
application, some of the data is cropped. Setting a larger trim size results in a
larger border on the printed page.