Konica Minolta DRYPRO 873, Руководство по эксплуатации

Страница: 69 / 124

1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
69
Maintenance Mode
8
If you save the settings, the following screen may be displayed and the film
count (Film Processing Amount) may be lost depending on the date change.
Confirm the count under Film Processing Amount before changing the date�
“3.6.4 Film Processing Amount” (page 57)
9
Use the [Test print] and [Calibration] buttons to move the cursor to [YES]
or [NO].
10
Press the [Service/Enter] button to select the item.
Select [YES] to save the settings. The maintenance menu appears.
Select [NO] to return to the maintenance menu without saving the settings.
The date and time setting may not be available depending on the
setting of PC�
The date can be set up to December 31, 2037.
3.6.11 Sleep Mode Setting
You can configure the sleep mode setting of the main unit. You can turn the sleep mode on or off and
set the sleep mode timer.
1
Enable maintenance mode.
“3.6.1 Enabling and Using Maintenance Mode” (page 54)
2
Use the [Test print] and [Calibration] buttons to move the cursor to the [Sleep
Mode Setting] icon . Press the [Service/Enter] button to select the item.
3
The following message appears in the display window�
Sleep Mode Use Sleep Mode Timer