Konica Minolta Drypro 832, Руководство пользователя

Страница: 79 / 84

1
2
3
4
5
Appendix
7
8
9
1 0
1 1
1 2
79
Test Print Check List
DRYPRO MODEL 832 Test Print Check List
* Enter “OK” or “NG” in the “Judgment” column and density value in “( )”
Date and time of
implementation
Year Month Day ( ) :
Main Unit
Name
Name of a Person
in Charge
Tray Tray 1/Tray 2
Category
Item-
Num-
ber
Item to be Checked
Judgment *
1st Recheck
Visual check of QC pattern
Image
appear-
ance
(1) “Geometric pattern” is printed
(2) Alphabetic/numeric characters on the film image can be
properly identified
(3) No “speckle noise” was created on all or part of the film
image
(4) No “horizontal stripe” was created on all or part of the film
image
(5) No “vertical stripe” was created on all or part of the film
image
(6) No “serious image distortion” was created on all or part of
the film image
(7) No “image wear” was created on all or part of the film image
(8) No “image anomaly” other than items in c to g occurred on
all or part of the film image
Resolu-
tion
(9) The “horizontal thin line” of QC pattern appears to be
resolved
(Use of a magnifying glass)
(10) The “vertical thin line” of QC pattern appears to be resolved
(Use of a magnifying glass)
Check from operation panel
Density
(11) After printing the QC pattern, “Dens. Error <Tray No.>” is
not
displayed on the DRYPRO 832 operation panel
(12) After printing the QC pattern, “NG” is not displayed in “1”
to “4” of the “QC results” in the QC Results View on the
DRYPRO 832 operation panel, but the correct density value
(three digits) is
displayed
1:( )
2:( )
3:( )
4:( )
1:( )
2:( )
3:( )
4:( )
Remarks
Total judgment
If the first total judgment shows “NG”, print the QC pattern again after performing calibration and recheck. If the
total judgment is “NG” again on rechecking, contact Konica Minolta technical representatives.