Konica Minolta Di 200, Руководство пользователя

Страница: 68 / 138

3 Initial Steps . . .
3-8 Di200
Processing Originals using the Duplexing Document Feeder
Feed originals with the duplexing document feeder.
1 Set the document guide to the size
of the original.
2 Load up to 50 originals (80 g/m2)
into the document feeder. The side
that is to be copied must be up.
? Do you have to load the originals
differently than illustrated here?
§ Define the original document
alignment. For more
information, see page 4-16.
3 Make sure that the stack of originals
does not exceed the maximum fill
height (see
Ä
mark on the
document feeder).
4 Push the originals flush up against the feed chamber.
5 Start the copy cycle.
The originals are pulled in starting with the top sheet.
Note the following important information!
Suitable originals for the duplexing document feeder are:
Type of originals: • Single sheets of smooth standard paper
• Single Feed Tray
40.1 up to 81.4 g/m
2
• 1-sided originals 50 up to 110 g/m
2
• 2-sided originals 60 up to 90 g/m
2
• with Mixed Original Detection 60 up to 90 g/m
2
Original size: • 1-/2-sided originals A3L to A5L
• with Mixed Original Detection A3 L to A4
P
P