Konica Minolta Di 200, Руководство пользователя

Страница: 96 / 138

6 Troubleshooting
6-2 Di200
The image is too
dark.
The exposure level for the
Auto Exposure Mode is set
on a dark value. Change the Copy
Density in the User's
Choice.
For more information see
Chapter 5 of the extended
manual on the CD-R.
Manually set the exposure
to a lighter level, see page 4-
18.
The exposure level has
been manually set too dark. Manually set the exposure
to a lighter level, see page 4-
18.
The entire surface of the
original glass is dirty. Clean the original glass, see
page 7-1.
The original is not flat
against the original glass. Place the original on the
original glass correctly; see
page 3-10.
The copy is blurry.
The paper is damp. Replace the paper.
The image is
uneven.
The entire surface of the
original glass is dirty. Clean the original glass,
see page 7-1.
The original pad or
document transport belt is
dirty. Clean the original pad and/
or document transport belt;
see page 7-1.
The original is very thin or
highly transparent. Place a blank sheet of paper
over the original.
The original is 2-sided. Manually set the exposure
to a lighter level, see page 4-
18.
Symptom Possible cause Action