Konica Minolta Bizhub-C31P, Руководство по обслуживанию

Страница: 240 / 370

Field Service V er. 1.0 Apr. 200 8 14. Malfunction code
203
bizhub C31P
T
roubleshooting
004C OZONE
FAN
Ozone ventilation fan
motor malfunction • The ozone ventilation fan motor does not rotate
evenly even after the lapse of a given period of time
while it is being started.
• The motor lock signal remains HIGH for a given
period of consecutive time while the ozone ventila-
tion fan motor is being rotated.
004E POWER
FAN
DC power supply fan
motor malfunction • The DC power supply fan motor does not rotate
evenly even after the lapse of a given period of time
while it is being started.
• The motor lock signal remains HIGH for a given
period of consecutive time while the DC power sup-
ply fan motor is being rotated.
0060 FUSER
MOTOR
Fusing motor
malfunction • The fusing motor does not rotate evenly even after
the lapse of a given period of time while it is being
started.
• The motor lock signal remains HIGH for a given
period of consecutive time while the fusing motor is
being rotated.
0094 XFER
DETACH 2
2nd image transfer
pressure/ retraction
failure • The retraction position sensor/2 is not activated
(retracted position) within a given period of time
after the retraction sequence of the 2nd transfer
roller has been started.
• The retraction position sensor/2 is not deactivated
(pressed position) within a given period of time after
the pressure sequence of the 2nd transfer roller has
been started.
0096 XFER
DETACH 1
1st image transfer
pressure/ retraction
failure • The retraction position sensor/1 is not activated
(retracted position) within a given period of time
after the intermediate transport motor has started
rotating.
• The retraction position sensor/1 is not deactivated
(pressed position) within a given period of time after
the intermediate transport motor has started rotat-
ing.
0300 POLYGON
MOTOR
Polygon motor
malfunction • The polygon motor does not rotate evenly even
after the lapse of a given period of time after it has
been started.
• The motor lock signal remains HIGH for a given
period of consecutive time while the polygon motor
is being rotated.
0310 LASER
ERROR
Laser malfunction • The SOS signal is not detected within a given
period of time after the output of the laser has been
started.
0500 FUSER
ERROR
Heating roller warm-up
failure • The thermistor/1 does not detect the specified tem-
perature and the warm-up cycle is not completed
even after the lapse of a given period of time after
the cycle has been started.
0501 FUSER
ERROR
Fusing pressure roller
warm-up failure • The thermistor/2 does not detect the specified tem-
perature and the warm-up cycle is not completed
even after the lapse of a given period of time after
the cycle has been started.
LCD1
(service
call ID)
LCD2/LCD3
(error
description)
Item Detection timing